Snow Guards – prudentbih.com

Home
»
Snow Guards

Snow GUARD FOR TIN ROOF

• Snowshoe Bat

Resistant to all weather conditions:

The number of rows depends on the length (L) and slope of the roof, and for standard roof slopes (15° – 30°) the following applies:
L = up to 4.00 m one “zig-zag” row
L = from 4.00 to 7.00 m two “zig-zag” rows
L = from 7.00 to 10.00 m three “zig-zag” rows
It is made in the following RAL colors: 8019, 9005, 8004, 8012, 7016.

For sheet metal in the form of tiles, we recommend a bat snow guard that completely blends into the visual appearance of the cover, unlike linear snow guards that significantly spoil the aesthetic appearance of the roof. The bat snow guard was designed specifically for this type of cover after many years of experience with other types of snow guards. This snow guard is mounted on the wave plate under the cascade. Sheet-wood screws 4.8 x 70 mm with rubber and metal washers are used for mounting. The rubber washer is placed in the groove for the screw on the lower side of the snow guard, and the metal washer is placed in the groove on the upper side of the snow guard, between the screw head and the snow guard itself. We recommend installing a metal protective cap for the screw head in the color of the cover. The distance between the rows should be such that the weight of the snow is evenly distributed over the entire roof.

SNOW GUARD FOR ROOF TILES

• Dotted Snow Guards

Resistant to all weather conditions:

The snow guard for the tile is a metal safety element whose purpose is to keep the snow on the roof and prevent it from falling.

These snow guards are installed in the lower area of the roof surface, near the roof ridge. They should be placed above the vent tiles to allow ventilation of the roof. It is very important that the snow guards are evenly distributed over the entire surface of the roof in order to stop the snow from falling. The distance between the snow guards must not be greater than 1 m due to the high-quality load ratio. An important feature is also the easy installation of this type of snow guard.
Available RAL colors: 7016, 8004, 8012, 8019, 9005.

Names of snow guards are not used according to the end consumer!